8 Ports PoE Switch Power Over Ethernet Injector Switch with NVR UPLINK Port
This is an Passive Power Over Ethernet of 8 port 10 / 100Mbps-T Ethernet switches, including 6 unsolicited PoE Ethernet ports and 1 Uplink ports. DC port apply 9~55V power supply adapter(not included), any one of the 6 port can provide output power, each Ethernet port can provide network transmission speeds of up to 10 / 100Mbps , with Cat5 / 5e / 6 network cable.
This POE switch only support 10/100M connection, PoE ports do not support Gigabit ethernet connection, because "Power Link 3~8" port using 4,5,7,8 pin as power transfer
Please do not connect any "NONE PoE gigabit ethernet device and Uplink device" on "Power Link 3~8" port, this will damage your device.
Gigabit(1000Mbps) ethernet device Please do not access "Power Link port" this will damage your device.
Features:
This is an Passive Power Over Ethernet of 8 port 10 / 100Mbps-T Ethernet switches, including 6 unsolicited PoE Ethernet ports and 1 Uplink ports. DC port apply 9~55V power supply adapter(not included), any one of the 6 port can provide output power, each Ethernet port can provide network transmission speeds of up to 10 / 100Mbps , with Cat5 / 5e / 6 network cable.
This POE switch only support 10/100M connection, PoE ports do not support Gigabit ethernet connection, because "Power Link 3~8" port using 4,5,7,8 pin as power transfer
Please do not connect any "NONE PoE gigabit ethernet device and Uplink device" on "Power Link 3~8" port, this will damage your device.
Gigabit(1000Mbps) ethernet device Please do not access "Power Link port" this will damage your device.
Features:
- 8 x 10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 6-Ports PoE function
- Midspan Mode-B Unsolicited Power(4,5+/7,8-)
- Supports 9~55V DC power supply
- Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.
- Full/half duplex transfer mode for each port.
| ALL Port: | Standard 10/100Mbps Ethernet port. Support 10Mbps Ethernet and 100Mbps Fast Ethernet, can operate in full-duplex or half-duplex mode,must work with 4 pairs UTP Cat5/5e/6 cable. | |
| Power Link Port 3-8-: | any supported unsolicited power on pairs 45-78 pins compliant Powered Devices (PDs) |
| Power LED | LED ON: power on. LED OUT: power off | |
| LED Light LINK/ACT | LED ON Indicates the port is connected to a network device and has been started | |
| LED OFF Indicates that this port is not connected to a network device or has not been started | ||
| Standard | IEEE 802.3 10BASE-T Ethernet |
| IEEE 802.3u 100BASE-TX Fast Ethernet | |
| IEEE 802.3x Full-Duplex flow control | |
| Protocol | CSMA/CD Ethernet |
| Data Transfer Rate | Ethernet: 10Mbps (Half Duplex),20Mbps (Full Duplex) |
| Fast Ethernet: 100Mbps (Half Duplex) ,200Mbps (Full Duplex) | |
| IC Chips | IC Plus IP178G |
| Network Media(Cable) | 10Base-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) |
| 100Base-TX:UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) | |
| PoE Power on RJ45 | Power +: pin 4 & pin 5 ; Power -: pin 7 & pin 8 |
| DC Output: 9-55V, Per port Max 1A, | |
| Number of Ports | 8 x 10/100Mbps Auto-Negotiation RJ45 ports with 6 PoE enabled (port-3 ~ port-8) |
| Power Input | Supports INPUT 9-55V DC power supply |
| Power DC port 5.5 x 2.1mm, inside positive (+) outside negative (-) | |
| Power Consumption | 3.2 Watts (max. no PD connected) |
| According to the actual power consumption of equipment | |
| Temperature | Operation Temperature:0 ~40ºC (32 ~104ºF ) |
| Storage Temperature: -40 ~70ºC(-40 ~158ºF) | |
| Humidity | Storage Humidity 5%~90% non-condensing, Operating Humidity 10%~90% non-condensing |
| Product Dimensions | 125mm W x 68mm D x 32mm H |
| RAM Register Capacity | 64K bytes per device |
| MAC Address List | 1K entries per device |
| Frame Forward Rate | 10Mbps Ethernet: 14880pps/Port |